PIC单片机广告灯程序-EDA365

单片机 > 单片机程序设计 > 详情

PIC单片机广告灯程序

发布时间：

程序介绍：灯为左右移动加闪烁，程序中采用了调用子程序功能

//** Date: Wednesday, November 21, 2012 21:51:18

#define MX_PIC

//Defines for microcontroller
#define P16F690
#define MX_EE
#define MX_EE_SIZE 256
#define MX_SPI
#define MX_SPI_BCB
#define MX_SPI_SDI 4
#define MX_SPI_SDO 7
#define MX_SPI_SCK 6
#define MX_UART
#define MX_UART_B
#define MX_UART_TX 7
#define MX_UART_RX 5
#define MX_I2C
#define MX_MI2C
#define MX_I2C_B
#define MX_I2C_SDA 4
#define MX_I2C_SCL 6
#define MX_PWM
#define MX_PWM_CNT 1
#define MX_PWM_TRIS1 trisc
#define MX_PWM_1 5

//Functions
#define MX_CLK_SPEED 19660800
#ifdef _BOOSTC
#include
#endif
#ifdef HI_TECH_C
#include
#endif

//Configuration data

//Internal functions
#include "F:Program FilesMatrix MultimediaFlowcode V4FCDinternals.h"

//Macro function declarations
void FCM_L();
void FCM_R();
void FCM_S();

//Variable declarations
char FCV_AR;
char FCV_AS;
char FCV_AL;
char FCV_COUNT;

//Macro implementations

void FCM_L()
{
FCV_COUNT = 0;
while (FCV_COUNT<2)
｛
  FCV_AL = 0x01;
  while (FCV_AL>0)
  {
   trisc = 0x00;
   portc = FCV_AL;
   delay_ms(100);
   FCV_AL = FCV_AL<<1;

}
FCV_COUNT = FCV_COUNT+1;

}
}

void FCM_R()
{
FCV_COUNT = 0;
while (FCV_COUNT<2)
{
  FCV_AR = 0x80;
  while (FCV_AR>0)
  {
   trisc = 0x00;
   portc = FCV_AR;
   delay_ms(100);
   FCV_AR = FCV_AR>>1;

}
FCV_COUNT = FCV_COUNT+1;

}
}

void FCM_S()
{
FCV_COUNT = 0;
while (FCV_COUNT<2)
{
  FCV_AS = 0xFF;
  trisc = 0x00;
  portc = FCV_AS;
  delay_ms(100);
  FCV_AS = 0x00;
  trisc = 0x00;
  portc = FCV_AS;
  delay_ms(100);
  FCV_COUNT = FCV_COUNT+1;

}
}

void main()
{

//Initialisation
ansel = 0;
anselh = 0;

//Interrupt initialisation code
option_reg = 0xC0;

//Loop
//Loop: While 1
while (1)
{
  FCM_L();
  FCM_R();
  FCM_S();
}
mainendloop: goto mainendloop;
}

void MX_INTERRUPT_MACRO(void)
{
}

关键字：PIC单片机广告灯

『本文转载自网络,版权归原作者所有,如有侵权请联系删除』